Professional tools for your bicycle transmission. Measure correctly and fasten safely.
The Revolver 3 chain riveting tool is capable of safely joining and securing all bicycle chains from singlespeed to 11-speed and riveting those chains with re-useable pins to the highest workshop quality. Check the wear level of your chain and HG sprockets using the Caliber 2 and HG-Check tools respectively. Replace damaged or worn SPEEDHUB sprockets and carriers with the use of our SPEEDHUB Sprocket Remover Tool and you’re your SPEEDHUB shifter cables correctly with the help of our Cable Hook and Measurement tube tools.
Universal Security Riveting Tool (…and one for all!)
Regardless as to which attachment method your bicycle chain uses, the Revolver 3 is capable of fastening them all. Bicycle chains are subjected to enormous forces and in a world where ever thinner, lighter materials are implemented, the demands we place upon the material become less and less rational. It is therefore all the more necessary that the components we use are correctly mounted. The Revolver 3 is the professional chain tool, trusted by countless high-class workshops worldwide. Able to open and safely close all derailleur chains as well as singlespeed chains in 1/2” x 3/32” and 1/2” x 1/8”. The current generation of 12-speed SRAM chains can be equally opened and closed with the Revolver 3 tool as can all 10 and 11 speed Campagnolo chains thanks to the second spindle included with the Revolver.
Our Revolver 3 is constructed from high quality nylon and hardened steel, making use of incredibly hard Carbide where necessary. This tool is in constant use in bicycle workshops worldwide and can be found in the toolbox of many a hobby mechanic, ensuring a perfectly joined chain is fitted to both race and everyday bikes.
Keep an eye on your chain wear.
Only a fully functioning chain is able to perform smoothly – and only then, are sprockets and chainrings protected from excessive wear. The Rohloff Caliber 2 tool shows at a glance if its time to replace those sprockets. Replace your sprockets and chainrings at the exact point where they reach their limits and in doing so, protect your sprockets from excessive wear.
The Caliber 2 allows you to quickly determine chain wear before your chain gets to this condition.
Perfect transmission thanks to fresh sprockets
Ride with the highest transmission efficiency. Place your trust in a reliable transmission. The Rohloff HG-CHECK enables you to concentrate on your tour or race without worrying about your transmission letting you down. The HG-CHECK tool allows you to check the condition of your Shimano sprockets easily.
Threaded sprocket and sprocket Carrier remover tool
The Rohloff Sprocket Remover Tool should be used together with a chain-whip and 24mm wrench to remove the original threaded sprockets from a SPEEDHUB. Removal of our new splined sprocket Carrier and original Carbon Drive Carrier can also be accomplished with the use of this tool.
SET OF CUTTING AIDS
Easily trim shifter cables to the correct length
It is near impossible to cut SPEEDHUB shifter cables more precisely. The brass measurement tubes are simply slipped over the shifter cables, pushed up to the housing and the protruding inner cable then trimmed at the end. Set consists of 2 tubes; one at 165mm for the internal hub cable, and one at 200mm for the external shifter cable.
Shifter cable trimming tool for the Internal Gear Mech.
The length of the shifter cables protruding after the cable adjusters of an Internal Gear Mech, can vary wildly depending upon the frames rear triangle length. The Cable Hook tool enables shifter cables for Internal Gear Mechs to be trimmed precisely, regardless of frame design.
Order for replacement SPEEDHUB components
A tidy workshop is an efficient workshop. The Rohloff Service Box includes all spare parts for the SPEEDHUB that are prone to wear-and-tear, ensuring a fast SPEEDHUB service is always within reach.