Rohloff Shifters

The twist shifter works with two shift cables. When the twist shifter is rotated forward (direction gear #14), than the rear shift cable 14 is pulled. When the twist shifter is rotated backward (direction gear #1), than the front shift cable 1 is pulled.

The indexing of the shifting lies not in the twist shifter as with common designs, but inside the hub. There is no wear on the indexing system nor need to adjust it.

The Rohloff Twist Shifter and parts can be ordered under the following part number:

8026 Shifter lite - Right hand

8026 Shifter lite – Right hand

8207 Shifter lite - Left hand

8207 Shifter lite – Left hand

8195 Shifter rubber grip Left hand

8195 Shifter rubber grip Left hand

8190 Shifter rubber grip Right hand

8190 Shifter rubber grip Right hand

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8194 Shifter lite Cable pulley

8194 Shifter lite Cable pulley

 

8191 Shifter lite cable stops

8191 Shifter lite cable stops

 

8193 Shifter lite TX20 screws & clamp

8193 Shifter lite TX20 screws & clamp

 

If you still have the old shifter and you like this then the parts you are after are.

8201 Original shifter rubber grip

8201 Original shifter rubber grip

8202 Original Shifter Cable guides

8202 Original Shifter Cable guides

8203 Original Shifter TX20 bolts to hold on cable stops

8203 Original Shifter TX20 bolts to hold on cable stops

8204 Original Shifter screw to clamp shifter to bars

8204 Original Shifter screw to clamp shifter to bars

 

Comments are closed.